Made in the U.S.A.

The bottom flagpole harness works for both the 15ft and 20ft telescoping flagpole. This harness is placed at the bottom of the pole and secures the bottom grommet of the flag to the flagpole. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

This pin lock is made for the 15ft telescoping flagpole. It locks the flagpole into place so that it can't be removed from the sleeve. It has an inside diameter of 2 1/4in. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

This pin lock is made for the 20ft telescoping flagpole. It locks the flagpole into place so that it can't be removed from the sleeve. It has an inside diameter of 2 1/2in. Made to fit telescoping flagpoles made by Uncommon USA.

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2 3/4”.

Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The spring is zinc plated high carbon steel having an overall length of 5 1/2" with the coiled section measuring 4”.

Made in the U.S.A.

The top flagpole harness works for both the 15ft and 20ft telescoping flagpole. This harness is placed at the top of the pole and secures the top grommet of the flag to the flagpole. It has an inside diameter of 1 3/4in. Made to fit telescoping flagpoles made by Uncommon USA.

The quick link is 1 3/8” wide and 2 7/8” long. The quick link is also constructed of stainless steel.

Available in white or brown. The length of the snap is 3".

This key is for a lock to an M Winch.

These nylon flag fastener clips are sold two per set and come complete with stainless steel spring clips. The halyard is held firmly in place with a positive lock nylon set screw.

Made in the U.S.A.

This top ornament fitting is placed at the top of the telescoping flagpole as a cap. This top ornament fitting will work for your 15ft and 20ft telescoping flagpole. Outside diameter is 1 5/8in and will work with flagpoles with a inside diameter of 1 5/8in. Made to fit telescoping flagpoles made by Uncommon USA.

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2”.

Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The 9” safety cable is constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps.

This is a replacement key to the lock of an external halyard door.

This is a replacement key to the lock of a door & frame unit.

The PCV Form Fit Foundation Sleeve will fit your flagpole snugly when the flagpole is inserted into the sleeve. This allows for no void between the flagpole and the sleeve and eliminates the need of any sand filler. 

The length of this snap is 3 1/2".

3 3/4" - For flags up to 8x12ft

4 3/4" - For flags 10x15ft and up

The cable swivel connector is made of stainless steel and is available in two sizes.

3 1/8” overall length with a 1” threaded length. The bolt threading is #8-32NC and is zinc plated steel. The pulley is made of zinc with a maximum halyard diameter of 3/16”. Hex nut, washer, and lock washer are all included.

Made in the U.S.A.

This top stop ring is placed at the top of the telescoping flagpole. This piece prevents the top flag harness from sliding down the flagpole and keeps it in place at the top of the telescoping flagpole. It has an inside diameter of 1 3/4in and will a pole with an outside diameter of 1 3/4in. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

This small bushing is placed between the thinnest portion and the second thinnest portion on a 15ft or 20ft telescoping flagpole. It has an outside diameter of 1 7/8in and would fit a pole section with an inside diameter of 1 7/8in. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

This medium bushing is placed between the middle and bottom section of the 15ft telescoping flagpole and in between the two middle sections of the 20ft telescoping flagpole. It has an outside diameter of 2 1/8in and would fit a pole section with an inside diameter of 2 1/8in. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

This large bushing is placed between the bottom two section of the 20ft telescoping flagpole. This has a outside diameter of 2 3/8in and will fit a flagpole section with the inside diameter of  2 3/8in. Made to fit telescoping flagpoles made by Uncommon USA.

This Aluminum Spindle allows an indoor topper to be used on an outdoor truck. It has 1in of threading at the bass, 2 3/4in of steam in the middle, and 5/8in of threading at the top.

Made in the U.S.A.

The foundation sleeve pin bolt is used for both the 15ft and 20ft telescoping flagpole. This piece is inserted through the foundation sleeve to keep the flagpole from reaching the bottom of the foundation sleeve. This allows for drainage and keeps the flagpole from freezing inside the foundation sleeve. Made to fit telescoping flagpoles made by Uncommon USA.

This solid brass double snap is 4" in length.

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two #10-5/8” self-tapping flat head mounting screws. The distance between bolt centers is 1".