This school class room bracket can display your flagpole at a 45º angle. It is can fit mounted staffs with a diameter of 1/4in to 5/8in.

This electric way aluminum bracket is supplied with a thumb screw. It displays a 1in diameter flagpole at a 45º angel and is held in place with an electric way bracket strap (sold separately).

This electric way cast bronze bracket is supplied with a set screw. It displays a 1in diameter flagpole at a 45º angel and is held in place with an electric way bracket strap (sold separately).

Electric way aluminum bracket straps are used to secure both types of electric way brackets. It is designed for pole diameters of 6in and smaller.

This 25º Wall Shield Aluminum Bracket is supplied with a set screw. It displays a flagpole at a 25º angel and is available to fit a flagpole diameter of 15/16in, 1in, or 1 1/8in.

This 70º Wall Shield Aluminum Bracket is supplied with a set screw. It displays a flagpole at a 70º angel and is available to fit a flagpole diameter of 15/16in, 1in, or 1 1/8in.

This 3 Finger Cast Aluminum Bracket holds three mounted flags. Each finger can hold a 3/8in diameter staff at a 45º angle.

This 5 Finger Cast Aluminum Bracket holds five mounted flags. Each finger can hold a 3/8in diameter staff at a 45º angle.

This 3 Finger Stamped Steel Bracket holds three mounted flags. Each finger can hold a 3/8in diameter staff at a 45º angle.

This 5 Finger Stamped Steel Bracket holds five mounted flags. Each finger can hold a 3/8in diameter staff at a 45º angle.

This 5 Finger Bicycle Stamped Steel Bracket holds five mounted flags. Each finger can hold a 3/16in diameter staff. This bracket is adjustable to any angle. (Flags shown are not included.)

This Type 1 Parking Meter Bracket is made to fit a 1 3/8in diameter flagpole.

This Type 2 Parking Meter Bracket is made to fit a 1 3/8in diameter flagpole.

This Lawn Spike is made from fabricated aluminum and can hold a 1in diameter pole. It has a total length of 10in.

This Lawn Spike is made from fabricated aluminum and can hold a 1 3/8in diameter pole. It has a total length of 10in.

This Lawn Spike is made from fabricated galvanized steel and can hold a 1in diameter pole. It has a total length of 9 1/2in.

This Lawn Spike is made from cast aluminum and can hold a 1in diameter pole. It has a total length of 10in.

This Lawn Spike is made from cast aluminum and can hold a 1 3/8in diameter pole. It has a total length of 13in.

This Curb Socket is made from cast aluminum and can hold a 1in diameter pole. It has a total length of 6in.

This Curb Socket is made from cast aluminum and can hold a 1 3/8in diameter pole. It has a total length of 8 1/2in.

This Vertical Flagpole Holder is silver and can hold a 1in diameter pole. It is also supplied with a thumb screw to help keep the pole in place.

This Vertical Roof Mount Flagpole Holder is silver and is available for a 1 3/8in, 1 1/2in, or 2in diameter pole. It is also supplied with a thumb screw to help keep the pole in place.

This Aluminum Tire Mount is silver and is available for a 1 3/8in, 1 1/2in, or 2in diameter pole. Simply drive over the base plate with a vehicle tire to keep it in place. It is also supplied with a thumb screw to secure the pole.

This Wall Mount Vertical Flagpole Holder is bright zinc plated silver and can hold a 1in diameter pole. It is also supplied with set screws to keep the pole in place.

The 3 Prong Ground Spike supports a 1" diameter pole. The 3 spikes can be pushed into the ground to provide excellent anchoring for a wide array of flag applications.