The cable swivel connector is made of stainless steel and is available in two sizes.

The length of this snap is 3 1/2".

3 3/4" - For flags up to 8x12ft

4 3/4" - For flags 10x15ft and up

The PCV Form Fit Foundation Sleeve will fit your flagpole snugly when the flagpole is inserted into the sleeve. This allows for no void between the flagpole and the sleeve and eliminates the need of any sand filler. 

This is a replacement key to the lock of an external halyard door.

This is a replacement key to the lock of a door & frame unit.

Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The 9” safety cable is constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps.

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2”.

Made in the U.S.A.

This top ornament fitting is placed at the top of the telescoping flagpole as a cap. This top ornament fitting will work for your 15ft and 20ft telescoping flagpole. Outside diameter is 1 5/8in and will work with flagpoles with a inside diameter of 1 5/8in. Made to fit telescoping flagpoles made by Uncommon USA.

These nylon flag fastener clips are sold two per set and come complete with stainless steel spring clips. The halyard is held firmly in place with a positive lock nylon set screw.

This key is for a lock to an M Winch.

Available in white or brown. The length of the snap is 3".

The quick link is 1 3/8” wide and 2 7/8” long. The quick link is also constructed of stainless steel.

Made in the U.S.A.

The top flagpole harness works for both the 15ft and 20ft telescoping flagpole. This harness is placed at the top of the pole and secures the top grommet of the flag to the flagpole. It has an inside diameter of 1 3/4in. Made to fit telescoping flagpoles made by Uncommon USA.

Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The spring is zinc plated high carbon steel having an overall length of 5 1/2" with the coiled section measuring 4”.

Available Finishes
Silver	Bronze	White	Black

This cleat comes with two 1/4"-20NC stainless steel mounting screws. The distance between bolt centers is 2 3/4”.

Made in the U.S.A.

This pin lock is made for the 15ft telescoping flagpole. It locks the flagpole into place so that it can't be removed from the sleeve. It has an inside diameter of 2 1/4in. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

This pin lock is made for the 20ft telescoping flagpole. It locks the flagpole into place so that it can't be removed from the sleeve. It has an inside diameter of 2 1/2in. Made to fit telescoping flagpoles made by Uncommon USA.

Made in the U.S.A.

The bottom flagpole harness works for both the 15ft and 20ft telescoping flagpole. This harness is placed at the bottom of the pole and secures the bottom grommet of the flag to the flagpole. Made to fit telescoping flagpoles made by Uncommon USA.

This lock & key is designed for the internal halyard door & frame units. It comes with 2 keys.

This lock and key is designed to be used with the internal halyard doors.

This 3in diameter gold globe is for the 15in aluminum eagle. This piece fits over the spindle and sits below the eagle.

Made in the U.S.A.

The double flag harness works for both the 15ft and the 20ft telescoping flagpole. This piece is pace in the middle of the top and bottom flag harnesses. This gives the flagpole the ability to fly two flags at the same time. It has an inside diameter of 1 3/4in. Made to fit telescoping flagpoles made by Uncommon USA.

This is the most durable clip available. Available in both 3 3/4" and 4 3/4" in length.

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These roped retainer rings are constructed of 3/16” nylon wire center halyard with a zinc plated carbon steel thimble attached to one end with an aluminum crimp. Complete with stainless steel quick link.

The PCV Standard Foundation Sleeve is for flagpole diameters of 3" - 3 1/2". The sleeve requires wood wedges and sand for a proper installation.

This product is 4 1/8” overall in length with a 2 3/8” threaded length. The bolt threading is 5/16”-18NC and is stainless steel. The pulley is made of nylon with a maximum halyard diameter of 5/16”. Hex nut, washer, and lock washer are all included.

Four different replacement sections are available. Each is 48" in length with a diameter of 1 3/8".