These cable & rope crimps can be used with cable & rope thimbles. The 3/32”, 1/8”, and 5/32” are made of copper. The largest size, fitting 1/4”-5/16”, is made of aluminum.

The copper cable stop can be used on cables with a diameter up to 1/8”.

Stainless steel cable is priced per foot. Enter the length desired in the quantity field.

These cable & rope thimbles are constructed of stainless steel and are able to fit a diameter of 3/32” or 1/8”-5/32” cable or rope.

The cable swivel connector is made of stainless steel and is available in two sizes.

This is a replacement key to the lock of an external halyard door.

This is a replacement key to the lock of a door & frame unit.

Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The 9” safety cable is constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps.

This key is for a lock to an M Winch.

The quick link is 1 3/8” wide and 2 7/8” long. The quick link is also constructed of stainless steel.

Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The spring is zinc plated high carbon steel having an overall length of 5 1/2" with the coiled section measuring 4”.

This lock & key is designed for the internal halyard door & frame units. It comes with 2 keys.

This lock and key is designed to be used with the internal halyard doors.

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These roped retainer rings are constructed of 3/16” nylon wire center halyard with a zinc plated carbon steel thimble attached to one end with an aluminum crimp. Complete with stainless steel quick link.

All flag arrangements are constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangements provide the method of attaching the flag or flags to the cable assembly. This is also an excellent method for changing the quantity of flags or the size(s) of flag(s) without having to change the entire cable assembly. Flag arrangements are supplied with either 2 or 3 stainless steel quick links depending on the flag size.

The 3.5lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with one eyebolt.

** Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.

This winch handle is designed to be used with any of the stainless steel winches we sell.

This handle is designed for the winch of a 5" diameter flagpole equipped with an M-Winch.

The 7lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with an eyebolt attached to each end.

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The internal pulley assembly has a 1 1/2” outside diameter cast nylon pulley and the external pulley assembly has a 1 1/2” outside diameter cast nylon pulley for the 3 1/2" truck and 2" outside diameter cast nylon pully for the 3" truck. All are on a 1/4" stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16”-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2”-13NC threading. The ornament is held in place by a size 10-32 stainless steel pan head screw. The maximum halyard diameter for this pulley is 5/16”.

The 14lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with an eyebolt attached to each end.

This Lock and Key set are designed for the M-Winch.

Available Finishes
Silver	Bronze	White	Black

This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.

Constructed of 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect or unraveling due to the rotation of the truck assembly. The lower cable section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if the winch is an “M”-type which does not require a cable stop. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. These standard cable assemblies are designed for flagpoles with a winch installed at 5’ above grade.

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” & 2” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.

This handle is designed for the winch of a 6"-14" diameter flagpole equipped with an M-Winch.

**Special Website Pricing**

Available Finishes
Silver	Bronze	White	Black

This Unit is designed for 5” diameter poles and is used with rope style internal halyard systems. Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame. The entire unit is inserted into the flagpole shaft and secured with eight 1/4”-20NC stainless steel screws. The minimum hole opening is 5 1/2” x 3 1/4". The lock and key are included.