Drum Width
These winches are available for use on flagpoles with a butt diameter of 6” or larger. These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied. The winch is locked at any position by removing the handle which engages the brake system. The small size is generally used on flagpoles up to 45’, the large size is used on flagpoles from 50’ thru 80’ and the X-Large size is used on flagpoles higher than 80’. The winch is mounted to the inside of the flagpole with two 5/16”-18NC stainless steel bolts with mounting centers being 3 1/2". Recommended diameters of stainless steel cable are 1/8” or 5/32”.
This winch handle is designed to be used with any of the stainless steel winches we sell.
All flag arrangements are constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangements provide the method of attaching the flag or flags to the cable assembly. This is also an excellent method for changing the quantity of flags or the size(s) of flag(s) without having to change the entire cable assembly. Flag arrangements are supplied with either 2 or 3 stainless steel quick links depending on the flag size.
Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The spring is zinc plated high carbon steel having an overall length of 5 1/2" with the coiled section measuring 4”.
Flagpoles utilizing an 8’ x 12’ flag arrangement or larger, it is recommended that a shock spring and safety cable be used. The 9” safety cable is constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps.
Stainless steel cable is priced per foot. Enter the length desired in the quantity field.
Constructed of 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect or unraveling due to the rotation of the truck assembly. The lower cable section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if the winch is an “M”-type which does not require a cable stop. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. These standard cable assemblies are designed for flagpoles with a winch installed at 5’ above grade.
** Special Website Pricing**
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” & 2” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.
**Special Website Pricing**
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These roped retainer rings are constructed of 3/16” nylon wire center halyard with a zinc plated carbon steel thimble attached to one end with an aluminum crimp. Complete with stainless steel quick link.
This internal halyard door is made for aluminum flagpoles with a diameter of 6”. It also comes with lock and keys.
This internal halyard door is made for aluminum flagpoles with a diameter of 7”-12”. It also comes with lock and keys.
This lock and key is designed to be used with the internal halyard doors.
This is a replacement key to the lock of an external halyard door.
This Unit is designed for 5” diameter poles and is used with rope style internal halyard systems. Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame. The entire unit is inserted into the flagpole shaft and secured with eight 1/4”-20NC stainless steel screws. The minimum hole opening is 5 1/2” x 3 1/4". The lock and key are included.
This lock & key is designed for the internal halyard door & frame units. It comes with 2 keys.
This is a replacement key to the lock of a door & frame unit.
The 3.5lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with one eyebolt.
The 7lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with an eyebolt attached to each end.
The 14lb counterweight is fabricated from 2” diameter steel and then coated with plastisol. This counterweight is also supplied with an eyebolt attached to each end.
These cable & rope crimps can be used with cable & rope thimbles. The 3/32”, 1/8”, and 5/32” are made of copper. The largest size, fitting 1/4”-5/16”, is made of aluminum.
These cable & rope thimbles are constructed of stainless steel and are able to fit a diameter of 3/32” or 1/8”-5/32” cable or rope.
The quick link is 1 3/8” wide and 2 7/8” long. The quick link is also constructed of stainless steel.
The cable swivel connector is made of stainless steel and is available in two sizes.
The PCV Form Fit Foundation Sleeve will fit your flagpole snugly when the flagpole is inserted into the sleeve. This allows for no void between the flagpole and the sleeve and eliminates the need of any sand filler.
The PCV Standard Foundation Sleeve is for flagpole diameters of 3" - 3 1/2". The sleeve requires wood wedges and sand for a proper installation.
The 3 Prong Ground Spike supports a 1" diameter pole. The 3 spikes can be pushed into the ground to provide excellent anchoring for a wide array of flag applications.
This flash collar has a wall thickness of .06” with an outside diameter of 8”. This flash collar is available for flagpole diameters of 2in – 2 1/2in.
...
FLAG CENTER - WAUWATOSA 2954 NORTH 117TH STREET WAUWATOSA, WISCONSIN 53222 PHONE 414-778-1776 HOURS: 9am-5pm M-F, 9am-Noon SAT
FLAG CENTER - OAK CREEK 7158 SOUTH 13TH STREET OAK CREEK, WISCONSIN 53154 PHONE 414-856-0040 HOURS: 9am-5pm M-F Closed SAT