This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. The wall thickness is .06” and fits a flagpole base diameter of 2 3/8" - 3”
This 10in diameter satin ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on 3/8” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/2” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for these pulleys is 5/16”.
This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a padlock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included./span>
This 13in gold cross aluminum ornament has a spindle threading of 1/2’’-13NC, and is 6 3/4in high. This ornament adds a religious element to the top of any flagpole.
This 15in wing span gold eagle aluminum ornament has a spindle threading of 1/2’’-13NC, and is 18in high. This ornament adds a patriotic element to the top of any flagpole.
This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a cylinder lock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included.
This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 16”. This flash collar is available for flagpole diameters of 5in-8in.
Made in the U.S.A.
This trailer hitch mount is made from aluminum and is for a standard 2in square Reese receiver hitch. Perfect mounting option for your 15ft and 20ft telescoping flagpole when tailgating or any other event when on the go. Made to fit telescoping flagpoles made by Uncommon USA.
This dock mount is perfect for your 15ft and 20ft telescoping flagpole. This mount has a flat base designed to be mounted to your dock. Made to fit telescoping flagpoles made by Uncommon USA.
**Special Website Pricing**
This 1/3” wide by 1” deep aluminum channel is designed to be used with the cleat cover boxes by providing additional protection 5’, 6’, 8’, or 10’ above the cleat box. The 5’, 6’, and 8’ models have an upper & lower hinge assembly and is secured to the pole with six #10-32NC stainless steel pan head screws (included). The 10’ model has upper, middle and lower hinge assemblies and is secured to the pole with nine #10-32NC stainless steel pan head screws (included). Cleat Cover Box sold separately.
This Unit is designed for 5” diameter poles and is used with rope style internal halyard systems. Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame. The entire unit is inserted into the flagpole shaft and secured with eight 1/4”-20NC stainless steel screws. The minimum hole opening is 5 1/2” x 3 1/4". The lock and key are included.
This handle is designed for the winch of a 6"-14" diameter flagpole equipped with an M-Winch.
This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 12”. This flash collar is available for flagpole diameters of 2in-6in.
This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 8”. This flash collar is available for flagpole diameters of 2in-2 1/2in.
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” & 2” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.
This truck is molded fiberglass, constructed with 1 1/2” outside diameter nylon pulleys on 1/4" stainless steel axles. Designed to slip into a 3" outside diameter pole top. The truck is hel in place by drilling thru the pole and securing the truck to the pole with screws and locktite. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC. The maximum halyard diameter for these pulleys is 5/16”.
This 11 1/4in wing span gold eagle aluminum ornament has a spindle threading of 1/2’’-13NC, and is 12in high. This ornament adds a patriotic element to the top of any flagpole.
This flash collar has a wall thickness of .06” with an outside diameter of 22”. This flash collar is available for flagpole diameters of 7in – 10in.
This 8in gold cross aluminum ornament has a spindle threading of 1/2’’-13NC, and is 4 1/4in high. This ornament adds a religious element to the top of any flagpole.
This 8in diameter aluminum clear anodized ball ornament has a spindle threading of 1/2’’-13NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
Constructed of 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect or unraveling due to the rotation of the truck assembly. The lower cable section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if the winch is an “M”-type which does not require a cable stop. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. These standard cable assemblies are designed for flagpoles with a winch installed at 5’ above grade.
This cleat comes with two 3/8”-16NC stainless steel slotted flat head screws. The total length of the cleat is 14 3/4”. The distance between bolt centers is 4 7/8”.
This series truck is cast aluminum, constructed with a 1 1/2” outside diameter cast nylon pulley on a 1/4” stainless steel axle. The bottom portion of the spindle is designed to fit over the top of the flagpole and is secured with three stainless steel set screws (1/4”-20NC on the 1 3/8” and 2” models & 5/16”-18NC on the 2 3/8” diameter model). The top is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard diameter for this pulley is 5/16”.
The 18' 1 5/8" diameter Fly it Flagpole Set is made out of aluminum. Flagpole consists of powder coated white painting four seamless aluminum tubing sections which swedge together providing a smooth exterior finish.
Contents:
This truck is cast aluminum, constructed for use on rope style internal halyard flagpoles. A small pulley assembly is affixed to the inside of the trick housing to allow the halyard to feed from inside the flagpole. The pulley assembly has a 2” outside diameter case nylon pulley on a 1/4" stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2" outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole. The top of the truck will accept an ornament with 1/2"-13NC threading. The ornament is secured to the truck with a 1/4"-20NC stainless steel set screw. The maximum halyard diameter for this pulley is 5/16”.
This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on a 1/4” stainless steel axle. This truck is designed to be used on flagpoles that have up to a 3 1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. For ease of rotation, product life and strength, these trucks utilize self-lubricating ball bearing assemblies. The maximum halyard size for this pulley is 5/16”.
...
FLAG CENTER - WAUWATOSA 2954 NORTH 117TH STREET WAUWATOSA, WISCONSIN 53222 PHONE 414-778-1776 HOURS: 9am-5pm M-F, 9am-Noon SAT
FLAG CENTER - OAK CREEK 7158 SOUTH 13TH STREET OAK CREEK, WISCONSIN 53154 PHONE 414-856-0040 HOURS: 9am-5pm M-F Closed SAT