This flash collar has a wall thickness of .06” with an outside diameter of 22”. This flash collar is available for flagpole diameters of 7in – 10in.
This 11 1/4in wing span gold eagle aluminum ornament has a spindle threading of 1/2’’-13NC, and is 12in high. This ornament adds a patriotic element to the top of any flagpole.
This truck is molded fiberglass, constructed with 1 1/2” outside diameter nylon pulleys on 1/4" stainless steel axles. Designed to slip into a 3" outside diameter pole top. The truck is hel in place by drilling thru the pole and securing the truck to the pole with screws and locktite. The top of the truck is designed to accept an ornament with a spindle threading of 1/2"-13NC. The maximum halyard diameter for these pulleys is 5/16”.
Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rigs can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. These beaded rings are constructed of 1” & 2” diameter nylon balls strung onto 1/8” stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of the retainer ring is measured from outside tips of each thimble.
This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 8”. This flash collar is available for flagpole diameters of 2in-2 1/2in.
This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 12”. This flash collar is available for flagpole diameters of 2in-6in.
This handle is designed for the winch of a 6"-14" diameter flagpole equipped with an M-Winch.
**Special Website Pricing**
This Unit is designed for 5” diameter poles and is used with rope style internal halyard systems. Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame. The entire unit is inserted into the flagpole shaft and secured with eight 1/4”-20NC stainless steel screws. The minimum hole opening is 5 1/2” x 3 1/4". The lock and key are included.
This 1/3” wide by 1” deep aluminum channel is designed to be used with the cleat cover boxes by providing additional protection 5’, 6’, 8’, or 10’ above the cleat box. The 5’, 6’, and 8’ models have an upper & lower hinge assembly and is secured to the pole with six #10-32NC stainless steel pan head screws (included). The 10’ model has upper, middle and lower hinge assemblies and is secured to the pole with nine #10-32NC stainless steel pan head screws (included). Cleat Cover Box sold separately.
Made in the U.S.A.
This dock mount is perfect for your 15ft and 20ft telescoping flagpole. This mount has a flat base designed to be mounted to your dock. Made to fit telescoping flagpoles made by Uncommon USA.
This trailer hitch mount is made from aluminum and is for a standard 2in square Reese receiver hitch. Perfect mounting option for your 15ft and 20ft telescoping flagpole when tailgating or any other event when on the go. Made to fit telescoping flagpoles made by Uncommon USA.
This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. This flash collar has a wall thickness of .06” with an outside diameter of 16”. This flash collar is available for flagpole diameters of 5in-8in.
This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a cylinder lock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included.
This 15in wing span gold eagle aluminum ornament has a spindle threading of 1/2’’-13NC, and is 18in high. This ornament adds a patriotic element to the top of any flagpole.
This 13in gold cross aluminum ornament has a spindle threading of 1/2’’-13NC, and is 6 3/4in high. This ornament adds a religious element to the top of any flagpole.
This cleat cover box is made from cast aluminum with stainless steel hinge pins. The design allows for easy installation utilizing the cleat holes to mount the cleat cover box. It comes complete with a padlock. Two extra-long 1/4 – 20NC stainless steel mounting screws are included./span>
This series truck is cast aluminum, constructed with a 1 15/16” outside diameter cast nylon pulley on 3/8” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 4” outside top diameter with female fitting installed. The bottom of the spindle has a 1 1/2” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2"-13NC. The ornament is secured to the truck with a 1/4”-20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The maximum halyard diameter for these pulleys is 5/16”.
This 10in diameter satin ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This 10in diameter aluminum gold ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This internal halyard door is made for aluminum flagpoles with a diameter of 6”. It also comes with lock and keys.
This internal halyard door is made for aluminum flagpoles with a diameter of 7”-12”. It also comes with lock and keys.
This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. This split flash collar can be useful when replacing or adding a flash collar to an installed flagpole without removing the pole from the foundation sleeve. The flash collar is split in half and mounting tabs with screws are installed on the underside of the collar. The wall thickness is .06” and fits a flagpole base diameter of 2 3/8" - 3”
This 10in diameter aluminum clear anodized ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
This side mount is perfect for your 15ft and 20ft telescoping flagpole. This can be mounted to any flat or round surface. Made to fit telescoping flagpoles made by Uncommon USA.
This high profile ‘Trumpet’ flash collar is generally used with flagpoles where a shoe base is welded to the bottom; however, this collar can be used on standard in-ground flagpole if a high profile look is desired. The wall thickness is .06” and fits a flagpole base diameter of 10”
This wheel mount is made from aluminum and sits right under your vertical's wheel. Perfect mounting option for your 15ft and 20ft telescoping flagpole when tailgating or any other event when on the go. Made to fit telescoping flagpoles made by Uncommon USA.
This 12in gold botonee cross aluminum ornament has a spindle threading of 5/8’’-11NC, and is 12in high. This ornament adds a religious element to the top of any flagpole.
This 12in diameter satin ball ornament has a spindle threading of 5/8’’-11NC. This flagpole ornament is a great addition to your flagpole giving it a traditional and aesthetically appealing look.
...
FLAG CENTER - WAUWATOSA 2954 NORTH 117TH STREET WAUWATOSA, WISCONSIN 53222 PHONE 414-778-1776 HOURS: 9am-5pm M-F, 9am-Noon SAT
FLAG CENTER - OAK CREEK 7158 SOUTH 13TH STREET OAK CREEK, WISCONSIN 53154 PHONE 414-856-0040 HOURS: 9am-5pm M-F Closed SAT